ARMOR CONVERSION MODIFICATION / ALTERATIONS
Five sides armoring of passenger compartment TP provide protection against 7.62X51, M80 NATO BALL Ammunition and tested to meet NIJ-STD-0108.01 LEVEL B6.
Floor is fitted with a blast protection to protect occupants against fragmentation from simultaneous detonation of 2 DM-51 German Ordinance Hand Grenades or Equivalent.
Armoring is included on kick panels, front fenders, rear wheel wells, firewall, A, B, C Door pillars and posts.
Vehicle Armor plates are stitch-welded using high intensity MIG welders, the above process ensures the structural integrity which is uncompromised by thermal and chemical variation of the material.
The interior frame is constructed of ballistic grade steel, provides overlap and backup protection for the large-surface principal impact areas such as the doors and windows while reinforcing the structural integrity of the pillars and the other areas.
Vehicle armoring constructed in such a way as to ensure that a projectile following a linear or angled path should not enter the vehicle interior without contacting the armor material, in addition to this the possibility of a projectile entering the vehicle interior due to a ricochet from the armor shall also be minimized.
Rear bulkhead with swing door and rear view glass.
GLASS
A combination of glass, polycarbonate and Mylar are bonded together using the latest technology, producing one of the finest transparent armors available while incorporating the following qualities:
– Glass thickness 39mm LEVEL B6
– Anti-spall shield protecting against the shattering glass
– Multiple impact protection
– Finest optical quality, minimal distortion
– No de-lamination
– No discoloration from UV rays
DOORS
Armor overlap at all doors to prevent penetration through door posts and pillars.
Door pillars and hinges reinforced for maximum strength retention.
ELECTRICAL
All electrical equipment standards to this vehicle shall be tasted and modified as necessary to protect against the armoring process.
INTERIOR
Original OEM interior panels and trim will be resized or modified and re-installed wherever possible to obtain as close to an original look as possible.
SECURITY FEATURES AND ACCESSORIES
Run flat devises fitted in vehicle tires.
Vehicle tire jack (upgraded if necessary to lift additional weight of armor) & tire iron.
Suspension System reinforced as necessary to compensate for additional weight.
Swing door with rear view glass at the rear of passenger compartment.
Steel-case fuel tank protection.
All manuals and written information provided by vehicle manufacturer shall be included.
BALLISTIC PROTECTION LEVEL DETAILS
The following charts represent the ballistic protection of the vehicle:
OPAQUE ARMOR, PASSENGER COMPARTMENT ROOF AND 4 SIDES, NIJ-STD-0108.01 LEVEL 6
WEAPON CALIBRE AMMUNITION VELOCITY
Rifle 7.62 x 51 mm M80 NATO Ball 2.750FPS
AK 47 7.62 x 39 mm M 1943 2.700 FPS
Sub Machine Gun 9 x 19 mm LCJJ 1.400 FPS
Tokorev 7.62 x 25 mm LCSJ 1.600 FPS
Hand Gun 44 Magnum LWC 1.443 FPS
TRANSPARENT ARMOR, NIJ-STD-0108.01 LEVEL B6
WEAPON CALIBRE AMMUNITION VELOCITY
Rifle 7.62 x 51 mm M80 NATO Ball 2.750FPS
AK 47 7.62 x 39 mm M 1943 2.700 FPS
Sub Machine Gun 9 x 19 mm LCJJ 1.400 FPS
Tokorev 7.62 x 25 mm LCSJ 1.600 FPS
Hand Gun 44 Magnum LWC 1.443 FPS
Floor of passenger compartment is protected to shield against fragmentation from 2 (TWO) DM-51 German Ordinance Hand Grenades or Equivalent.